INDOCART Tinta Resin 3D Printer Phrozen Aqua-Red Clay 8K 1kg

Kode Produk:
V-RSN-PHZAQ-8KREDCLAY

Phrozen’s Aqua 8K 3D Printing Resin is specifically formulated to showcase super-fine detail in full 8K resolutions. Works best with Phrozen’s 8K printers; Aqua 8K 3D Printing Resin is now available in 4 colors to fulfill all your 3D printing needs.

Specifications:
Weight: 1kg per bottle
Density: 1.10g/cm3
Viscosity: 280-380 cP
Surface Hardness: 82 Shore D
Tensile Stress at Break: 43MPa
Tensile modulus: 1730MPa
Elongation at Break, EAB: 8%
Notched Izod Impact：10.00 J/m
HDT at 0.45MPa: 77 ℃

Precautions
-Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
-After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with new resin.
-Keep resin away from kids and away from direct sunlight exposure.
-Wear gloves and masks when using resins. If this chemical contacts the skin or eye, wash with plenty of water.
-DO NOT dump resin. Please cure it and treat it as general plastic garbage.

Safety Data Sheet/User Guide:
-Aqua-Gray 8K: https://drive.google.com/drive/folders/1m5thS6ASdU4_g7mgdQK4aFnIwarg6id-
-Aqua Red-Clay 8K: https://drive.google.com/drive/folders/1BHdmW60LOxMCw2o62cmIOn_9arq8t4fy
-Aqua Snow-Gray 8K: https://drive.google.com/drive/folders/1UJGbORQltVozBKWNLKXP7wLSDqYYktlr
-Aqua-Vanilla 8K: https://drive.google.com/drive/folders/1xsByc9evQvjaE4JSUHdPhewoY0RCrqpv

Pastikan anda mendapatkan kualitas terbaik hanya di IndoCart.